Skip to main content
Contact Us
Product Catalog / ELECTROLESS NICKEL PLATED FLANGED LH ADAPTER EN5.0-1
No Image Available ELECTROLESS NICKEL PLATED FLANGED LH ADAPTER EN5.0-1 figure

Associated Figure: ELECTROLESS NICKEL PLATED FLANGED LH ADAPTER EN5.0-1

Request a Quote

ELECTROLESS NICKEL PLATED FLANGED LH ADAPTER EN5.0-1

Sopko Catalog #: 50397

Product Overview & Dimensions

3.000 in. Taper Per Foot with 1.00 in. Diameter at the Large End of taper. For 1.250 in. and 3.000 ID wheels. When corrosive coolants pose special problems, choose SOPKO ELECTROLESS NICKEL PLATED wheel adapters to reduce the high cost of replacement. Widely used in ELECTROLYTIC GRINDING machine applications and the RUBBER ROLL GRINDING INDUSTRY, Electroless Nickel plating deposits a uniformly dense coating of nickel-phosphorus alloy onto the adapter surface. - A HARD PROTECTIVE SHELL providing outstanding protection against wear and abrasion. - AN ECONOMICAL ALTERNATIVE to stainless steel or hard chrome finishes. - UNCOMMON CORROSION RESISTANCE to today's harsh coolant environments. *OSHA 1910.215(c) requires that no less than 33% of the grinding wheel needs to be covered by the flange.
Taper 3 in. Taper Per Foot
Large End
('G' Dimension)		 1 in. Large End
Wheel Locking Width
('A' Dimension)		 0 - 1/2
Overall Length
('C' Dimension)		 1-7/8
Thread Size
('D' Dimension)		 1-1/4-16LH

Adapter Configuration

Category Sopko Adapters
Sub-Category Standard Taper Wheel Adapters
Sub-Sub-Category Flanged Electroless Nickel Plated

Threading & Mounting

Thread Direction Left Hand

Physical Dimensions

Additional Features