Product Overview & Dimensions
4.500 in. Taper Per Foot with .87 in. diameter at Large End of Taper. For 1.250 in. ID Wheels. Used on all Cincinnati NO. 1 and NO. 2 spindles, Covel, and Gallmeyer & Livingston Cutter grinders; or any spindle with .87 in. diameter at the Large End of Taper and 4.500 in. Taper Per Foot.
SOPKO flanged adapters are machined from alloy steel. The resulting one-piece hub design distributes mounting pressures away from the bore, the weakest part of the grinding wheel. The inherent rigidity of one-piece design and the precision ground flange provides identical radial load-bearing surfaces for positive wheel lock and better spindle driving torque to the abrasive wheel. All surfaces are ground concentric and square for optimum surface finishes. Completely heat treated, SOPKO flanged adapters are safe to use and maintain their rigidity.
*Spindle mounting nut not included
| Taper |
4.500 in. Taper Per Foot |
Large End
('G' Dimension) |
.87 in. Large End |
Wheel Locking Width
('A' Dimension) |
0 - 1/2 |
Overall Length
('C' Dimension) |
1-3/8 |
Thread Size
('D' Dimension) |
1-1/4-16LH |
