Skip to main content
Contact Us
Product Catalog / BI-DIRECTIONAL BALANCING RH STANDARD TAPER ADAPTER B300-2 W/KEYWAY
No Image Available BI-DIRECTIONAL BALANCING RH STANDARD TAPER ADAPTER B300-2 W/KEYWAY figure

Associated Figure: BI-DIRECTIONAL BALANCING RH STANDARD TAPER ADAPTER B300-2 W/KEYWAY

Request a Quote

BI-DIRECTIONAL BALANCING RH STANDARD TAPER ADAPTER B300-2 W/KEYWAY

Sopko Catalog #: 50331

Product Overview & Dimensions

3.000 in. Taper Per Foot with 1.00 in. Diameter at the Large End of taper. For 1.250 in. ID standard width wheels. SOPKO balancing rings have milled pockets with 180° arc-length. One end of the arc is permanently stamped with a reference line and arrow to designate direction of rotation. Unlike some balancing rings, SOPKO "sandwiches" the milled pockets together inside the mated faces. Grinding grit can't build up! Rings are lapped flat and ground for a precision fit. A nylon-tipped set screw secures each ring to the adapter hub. All balancing adapters furnished with a 3/32 in. hex wrench (Catalog # 00938). Use SOPKO Balancing Adapters to: -Increase productivity. -Reduce downtime and maintenance. -Produce low micro-finishes. -Reduce wheel wear and truing frequency -Reduce costly spindle failures. Includes 2x #10-32 nylon-tipped set screws (Catalog # 00939)
Taper 3 in. Taper Per Foot
Large End
('G' Dimension)		 1 in. Large End
Wheel Locking Width
('A' Dimension)		 3/4 - 1
Overall Length
('C' Dimension)		 2-1/4
Thread Size
('D' Dimension)		 1-1/4-16RH
Keyway
('E' Dimension)		 3/16

Adapter Configuration

Category Sopko Adapters
Sub-Category Standard Taper Wheel Adapters
Sub-Sub-Category Balancing

Threading & Mounting

Thread Direction Right Hand

Physical Dimensions

Additional Features