Skip to main content
Contact Us
Product Catalog / BALANCING RH STANDARD TAPER ADAPTER B200-1-5/8
No Image Available BALANCING RH STANDARD TAPER ADAPTER B200-1-5/8 figure

Associated Figure: BALANCING RH STANDARD TAPER ADAPTER B200-1-5/8

Request a Quote

BALANCING RH STANDARD TAPER ADAPTER B200-1-5/8

Sopko Catalog #: 00229

Product Overview & Dimensions

3.000 in. Taper Per Foot with 1.00 in. Diameter at the Large End of taper. For 1.250 in. ID standard width wheels. SOPKO balancing rings have milled pockets with 180° arc-length. One end of the arc is permanently stamped with a reference line and arrow to designate direction of rotation. Unlike some balancing rings, SOPKO "sandwiches" the milled pockets together inside the mated faces. Grinding grit can't build up! Rings are lapped flat and ground for a precision fit. A nylon-tipped set screw secures each ring to the adapter hub. All balancing adapters furnished with a 3/32 in. hex wrench (Catalog # 00938). Use SOPKO Balancing Adapters to: -Increase productivity. -Reduce downtime and maintenance. -Produce low micro-finishes. -Reduce wheel wear and truing frequency -Reduce costly spindle failures.
Taper 3 in. Taper Per Foot
Large End
('G' Dimension)		 1 in. Large End
Wheel Locking Width
('A' Dimension)		 1/2
Overall Length
('C' Dimension)		 3-3/8
Thread Size
('D' Dimension)		 1-1/4-16RH

Adapter Configuration

Category Sopko Adapters
Sub-Category Standard Taper Wheel Adapters
Sub-Sub-Category Extended Balancing

Threading & Mounting

Thread Direction Right Hand

Physical Dimensions

Additional Features