Skip to main content
Contact Us
Product Catalog / ELECTROLESS NICKEL PLATED LH ADAPTER ENK200-1
No Image Available ELECTROLESS NICKEL PLATED LH ADAPTER ENK200-1 figure

Associated Figure: ELECTROLESS NICKEL PLATED LH ADAPTER ENK200-1

Request a Quote

ELECTROLESS NICKEL PLATED LH ADAPTER ENK200-1

Sopko Catalog #: 00352

Product Overview & Dimensions

3.000 in. Taper Per Foot with 1.00 in. Diameter at the Large End of taper. For 1.250 in. ID standard width wheels. When corrosive coolants pose special problems, choose SOPKO ELECTROLESS NICKEL PLATED wheel adapters to reduce the high cost of replacement. Widely used in ELECTROLYTIC GRINDING machine applications and the RUBBER ROLL GRINDING INDUSTRY, Electroless Nickel plating deposits a uniformly dense coating of nickel-phosphorus alloy onto the adapter surface. - A HARD PROTECTIVE SHELL providing outstanding protection against wear and abrasion. - AN ECONOMICAL ALTERNATIVE to stainless steel or hard chrome finishes. - UNCOMMON CORROSION RESISTANCE to today's harsh coolant environments. *BI-DIRECTIONAL adapters are furnished with two #10-32 nylon-tipped screws 00939 on nut OD for reversing rotation applications.
Taper 3 in. Taper Per Foot
Large End
('G' Dimension)		 1 in. Large End
Wheel Locking Width
('A' Dimension)		 1/8 - 1/2
Overall Length
('C' Dimension)		 1-3/4
Thread Size
('D' Dimension)		 1-1/4-16LH

Adapter Configuration

Category Sopko Adapters
Sub-Category Standard Taper Wheel Adapters
Sub-Sub-Category Electroless Nickel Plated

Threading & Mounting

Thread Direction Left Hand

Physical Dimensions

Additional Features