Skip to main content
Contact Us
Product Catalog / CINCINNATI CUP WHEEL RH ADAPTER C200-2CUP WHEEL
No Image Available CINCINNATI CUP WHEEL RH ADAPTER C200-2CUP WHEEL figure

Associated Figure: CINCINNATI CUP WHEEL RH ADAPTER C200-2CUP WHEEL

Request a Quote

CINCINNATI CUP WHEEL RH ADAPTER C200-2CUP WHEEL

Sopko Catalog #: 00289

Product Overview & Dimensions

4.500 in. Taper Per Foot with .87 in. diameter at Large End of Taper. For 1.250 in. ID Wheels. Used on all Cincinnati NO. 1 and NO. 2 spindles, Covel, and Gallmeyer & Livingston Cutter grinders; or any spindle with .87 in. diameter at the Large End of Taper and 4.500 in. Taper Per Foot. SOPKO cup wheel adapters are made wtih a THIN-WALL FRONT FLANGE design to give maximum usage of cup wheel depth. Fully HEAT TREATED, and made from SOLID BAR STOCK, SOPKO cup wheel extension adapters are RIGID to provide positive lock. A hardened nut locks the wheel from the back of the adapter. Because of this nut configuration, RH threads are used for clockwise spindle rotation and LH threads are used for counter-clockwise rotation; providing a safe locking system that WILL NOT LOOSEN during spindle rotation. *Spindle mounting nut not included
Taper 4.500 in. Taper Per Foot
Large End
('G' Dimension)		 .87 in. Large End
Wheel Locking Width
('A' Dimension)		 3/8 - 5/8
Overall Length
('C' Dimension)		 2-7/16
Thread Size
('D' Dimension)		 1-1/4-16RH

Adapter Configuration

Category Sopko Adapters
Sub-Category
Sub-Sub-Category Old Style - Cup Wheel

Threading & Mounting

Thread Direction Right Hand

Additional Features