Tools and Accessories for Wheel Adapters.
SPANNER WRENCHES.
Computer aided design and state-of-the-art manufacturing are combined to produce these versatile and practical wrenches. Drop forged, and heat treated to optimize strength and toughness, Sopko wrenches are made for performance. Thin wall box end construction provides the added clearance needed to free stubborn spindle nuts in tight places. Pins and prongs are integrally forged with the wrench for strength, then machined for a positive fit.  

35135 COMBINATION SPANNER AND HEX SOCKET WRENCH.
This Sopko innovation replaces older slotted wrench designs.
7/32" diameter pins set 1-3/4" apart. 11/16" single hex socket.
6-1/8" OAL. Black oxide finish.
 

10859 COMBINATION SPANNER AND PRONGED WRENCH.
7/32" diameter pins set 1-3/4" apart. Prongs 1/8" thick, 7/8" across. 6-1/32" OAL. Black oxide finish.
 

00424 (S424) FACE SPANNER WRENCH.
7/32" diameter pins set 1-3/4" apart.
6-1/8" OAL. Black oxide finish.

00476 (PS35135T) HEAVY DUTY COMBINATION SPANNER
AND HEX SOCKET WRENCH.
7/32" diameter pins set 1-3/4" apart. 11/16" single hex socket.
Oversized T-handle for extra leverage. 8-1/4" OAL.
Rust resistant finish.

01255 T-HANDLE HEX SOCKET PULLER WRENCH.
Incorporates 11/16" single hex socket wrench and T-handle with an adapter puller to create a one piece tool to remove adapters from spindle tapers. 6-1/8" long. Black oxide finish.

03869 ANCA TG7 WHEEL-PACK WRENCH.
Four 3/16" replaceable pins 01272 provide full nut engagement to safely remove or tighten wheel-packs. A 5/8" wide knurled band and a convenient 3/8" square drive make nut removal fast and easy.
Black oxide finish.

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.

 
 

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.		 CAUTION!
Always Wear Safety Goggles When Griding.

81

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 

Wheel Balancing Stand.

  • PORTABLE.

  • EXTEND GRINDING WHEEL LIFE.

  • EASY TO OPERATE.

  • LOW INVESTMENT.

  • UP TO 8" DIAMETER WHEELS.

  • USE WITH OR WITHOUT BALANCING ADAPTERS.

  • HARDENED AND GROUND RAILS.
     

01000 (BS1000) PORTABLE STATIC WHEEL BALANCER. Furnished with stand, leveling screw, bubble level, 3/16" hex wrench 03866, mounted hardened precision ground rails, and detailed operating instructions. The stand is 6-1/2" wide and 4-13/16" high with a 4" throat. It will handle 8" maximum diameter wheels and can be used with or without balancing style wheel adapters. For the lowest micro-inch finishes, use the BS1000 stand with SOPKO balancing ring adapters.

01001 (BS1000K1) PORTABLE STATIC WHEEL BALANCING KIT includes the 01000 (BS1000) balancing stand, the precision ground 52273 balancing arbor with nut, and the 00251 (B230-1) 3" diameter standard taper wheel adapter with balancing rings for 1/2" wide wheels maximum. Detailed operating instructions included.

01002 (BS1000K) PORTABLE STATIC WHEEL BALANCING KIT includes the 01000 (BS1000) balancing stand, the precision ground 52273 balancing arbor with nut, and the 00260 (B200-1) 2-1/4" diameter, standard taper wheel adapter with balancing rings for 1/2" wide wheels maximum. Detailed operating instructions included.


ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.

 
 

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.		 CAUTION!
Always Wear Safety Goggles When Griding.

90

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 
Sopko High Speed Attachment.
INCREASE THE USE OF YOUR SURFACE GRINDER.
USED ON HARIG, REID, K.O. LEE, PARKER MAJESTIC, AND MANY MORE.


08000
08000 Used to finish radii on dies or other parts requiring small contour grinding, this unit is perfect for the tool room, job shop, or any number of occasional use applications. Designed for long life and heavy use, the Sopko High Speed Attachment kit increases the productivity of your surface grinder. When attached, it’s like having an extra machine in the shop at only a fraction of the cost. The center distance between the surface grinder spindle and the attachment spindle is held to a minimum with our latest bracket design. The attachment spindle is shorter in length than competitive units, allowing maximum over-table use horizontally or vertically. The High Speed Attachment is furnished as a complete kit including all standard items listed below. Unit net weight 30.1 LB. Shipping weight 34 LB.
Standard unit includes:
08001 Bracket.
08002 3" Diameter eccentric bushing for Harig, Reid No. 2, K.O. Lee, Parker Majestic, Hammond No. 2, and others with 3” diameter spindles.
08003 17,500 RPM grease lubricated spindle with 1-3/16" diameter pulley.
08004 5-9/16" Diameter flat belt pulley.
00200 (200-1) Adapter. Pulley is mounted on the adapter and balanced.
10197 5/8" X 20-1/4" Sopko flat belt (2 pcs).
00630 (630) 11/16" Open end wrench for series 4000 collet chuck nut.
00631 (603A) 5/8" Open end wrench for collet chuck quill wrench flat.
00640 (604A) 3/4" Open end wrench for end of spindle.
08005 1/8" Short arm hex wrench.
08006 1/4" Short arm hex wrench.
35135 Spanner-socket wrench.
08007 Wooden storage box.
Maintain safe speeds, refer to grinding wheel manufacturers’ instructions and ANSI B7.1 or DIN 69170 safety standards.

 

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.		 CAUTION!
Always Wear Safety Goggles When Griding.

108

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888