Wheel Adapters for Grinding Machines Manufactured by ANCA, Victoria, Australia.
HSK50EMOD TAPER AND 19º 05' 06" INC ANGLE TAPER WITH .85" DIAMETER AT LARGE END OF TAPER. FOR 1.250" AND 2.000" ID WHEELS.


Sopko quality Anca FASTGRIND adapters are made for the operator expecting the highest standard of performance required by today's fast set-up times and short production runs. Sopko assures this standard with quality features like PRECISION GROUND TAPERS for reliable spindle mating and CONCENTRICALLY GROUND AND SQUARE surfaces to optimize cutting conditions and prolong wheel life. Hub OD threads are THREAD GROUND to assure safe, square wheel locking conditions. Every Anca adapter is furnished complete with a spindle mounting bolt, lock washer and recessed washer.

SOPKO 
CATALOG NO. 		 ANCA PART NO. A C D MACHINE
50356 - 2-5/32 4-3/4 1-1/4-16RH TGX
01137* - 2-5/32 4-3/4 1-1/4-16RH TGX
00318 - 3-3/8  6-11/32 2-16RH TGX
* For cupwheel use.

 


SOPKO 
CATALOG NO. 		 FIG. ANCA PART NO. DIMENSIONS
A C MACHINE
00621 1 AT901-0-00-0175 2-1/8 to 2-3/8 3-3/16 TG4
00622 1  AT901-0-00-0175-1 3-5/8 4-3/8 TG4
00623 1 AT901-0-00-0179 1-1/8 to 1-3/8 2-3/16 TG4
00624 1 AT901-0-00-0183 1/4 to 1/2 1-5/16 TG4
00620 2 AT901-0-00-0174 1/2 4-7/8 TG4

FIG.1

FIG.2
ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888
 

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.		 CAUTION!
Always Wear Safety Goggles When Griding.

43

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 

Wheel Adapters for Grinding Machines Manufactured by ANCA, Victoria, Australia.
3.500" TPF WITH 1.02", AND 1.38" DIAMETER AT LARGE END OF TAPER.  FOR 1.250" AND 2.000" ID WHEELS.

  


Sopko quality Anca FASTGRIND adapters are made for the operator expecting the highest standard of performance required by today's fast set-up times and short production runs. Sopko assures this standard with quality features like PRECISION GROUND TAPERS for reliable spindle mating and CONCENTRICALLY GROUND AND SQUARE surfaces to optimize cutting conditions and prolong wheel life. Hub OD threads are THREAD GROUND to assure safe, square wheel locking conditions and you can expect years of performance from these FASTGRIND adapters because Sopko HEAT TREATS every one. Every Anca adapter is furnished complete with a spindle mounting bolt, lock washer and recessed washer.
 

SOPKO CATALOG NO. FIG. ANCA PART NO.   DIMENSIONS    
A B C D G H MACHINE
00625 1 AT902-0-00-5026 1-1/8 to1-1/4 3 2-3/16 2-16RH 1.38 2.000 TG7/DM7
00626 1 AT902-0-00-5027 1-7/8 to 2 3 2-31/32 2-16RH 1.38 2.000 TG7/DM7
50063   1 -  2-5/8 3 3-9/16 2-16RH 1.38 2.000 TG7/DM7
00823 1 AT937-0-00-1009 3-1/4 3 4-1/8 2-16RH 1.38 2.000 TG7/DM7
00627  1 - 3-3/8 to 3-1/2 3 4-3/8 2-16RH 1.38 2.000 TG7/DM7
00822 1 AT937-0-00-1010 4-3/8 3 5-5/16 2-16RH  1.38 2.000 TG7/DM7
50163 2 AT902-0-01-5037  2 2  4.613 1-1/4-16RH 1.38 1.250 TG7/DM7
00628 1 AT913-0-00-1024 1-1/8 1-31/32 1-31/32 1-1/4-16RH 1.02 1.250 MG7/RG7
00629 1 AT913-0-00-1025 1-7/16 to 1-1/2 1-31/32 2-3/8 1-1/4-16RH  1.02 1.250 MG7/RG7
50186 1 - 2-1/8 1-31/32 3-1/32 1-1/4-16RH  1.02 1.250 MG7/RG7
50187 1 - 2-5/8 1-31/32 3-1/2 1-1/4-16RH 1.02 1.250 MG7/RG7
50188  1 - 3-1/8 1-31/32  4 1-1/4-16RH 1.02 1.250 MG7/RG7
50350* 1 - 2-1/2 3 3-7/16 2-16RH 1.02 2.000 MG7/RG7
00496** 1 AT913-2-00-1010  1-1/2 to 1-3/4 1-31/32   2-5/8 1-1/4-16RH 1.02 1.250 RGX
00521*** 1 AT913-2-00-1020 2 to 2-1/2 1-31/32   3-19/64 1-1/4-16RH 1.02  1.250 RGX
00398*** 1 AT913-2-00-1030 2-5/8 to 3 1-31/32 3-13/16 1-1/4-16RH 1.02 1.250 RGX
00879***  1  AT913-2-00-1040 3 to 3-3/8 1-31/32 4-7/32 1-1/4-16RH 1.02 1.250 RGX
* Allows use of 2" ID wheels on MG7/RG7 machines.
** Includes two 5MM spacers 01305, one 10MM spacer 01310, and bi-directional nut 00067.
*** Includes two 5MM spacers 01305, two 10MM spacers 01310, and bi-directional nut 00067.
ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888
 

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.		 CAUTION!
Always Wear Safety Goggles When Griding.

44

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 

Wheel Adapters for Grinding Machines
Manufactured by ANCA, Victoria, Australia.
19° 05' 06" INC ANGLE TAPER AND 3.500" TPF WITH .85", 1.02", AND 1.38"
DIAMETER AT LARGE END OF TAPER.

A Sopko innovation, Double Taper ANCA Conversion Adapters offer convenience and flexibility. Now, you can use conventional machines to accurately dress wheel-packs mounted on ANCA adapters without losing valuable production time. Two precision ground tapers provide reliable spindle and adapter mounting. Made from quality alloy steel, ANCA Double Taper Conversion Adapters are heat treated for strength, long-life, and rigidity. Diameters are ground for concentricity and squareness. These fine Sopko features combine to maintain the original high quality standards of the ANCA Fastgrind system. A 1-1/4” wrench flat on the body makes installation and removal easy.
FIG. 1

 
FIG. 2


FIG. 3
50193
SOPKO
CATALOG NO.		 FIG. DIMENSIONS
B C D F G T MACHINE
50194 1

1-1/2

3

3/8-16RH

2-1/4

.85

19° 05' 06"

TG4
50354 1

1-1/2

3-3/8

M12X1.75RH

1-7/8

1.38

3.500

TG7/DM7
50192 1

1-1/2

3-3/8

M12X1.75RH

1-7/8

1.38

3.500

TG7/DM7
50178 2

2

3-1/2

M12X2.0RH

2-1/4

1.38

3.500

TG7/DM7
01150 3

80MM (3.15”)

3-7/16

M12X1.75RH

1-15/16

1.38

3.500

TG7/DM7
50193 1

1-1/2

3

M8X1.25RH

1-15/16

1.02

3.500

MG7/RG7/RGX
00497 1

1-1/2

3-23/32

M8X1.25RH

2-5/8

1.02

3.500

MG7/RG7/RGX

See ANCA spacers on page 75 and accessories on page 81 and 83.
See ANCA Mount/Dismount fixture on page 94.
SPINDLE MOUNTING BOLT AND LOCK WASHER SETS
SOPKO
CATALOG NO.		 MACHINE THREAD LENGTH
00664 TG4 (00621) 3/8-16RH 2-3/4

00664

                 00666
00897 TG4 (00622) 3/8-16RH 4
01034 TG4 (00623) 3/8-16RH 1-3/4
01053 TG4 (00624) 3/8-16RH 3/4
01101 TG4 (00620) 3/8-16RH 4-1/2
00665 TG7/DM7 M12XP1.75RH 30MM (1.18”)

00665

 00667
00667 TG7 (50163) M12XP1.75RH 100MM (3.94”)
00666 MG7/RG7 M8XP1.25RH 30MM (1.18”)
RECESSED WASHERS
SOPKO
CATALOG NO.		 MACHINE OD ID THICKNESS
00162 TG4 21MM (.83”) 10MM (.39”) 6MM (.24”)
00163 TG7/DM7 33MM (1.30”) 13MM (.51”) 7MM (.28”)
00164 MG7/RG7 22MM (.87”) 8.5MM (.33”) 15MM (.59”) 00164

                00163                  00162
 

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.		 CAUTION!
Always Wear Safety Goggles When Griding.

45

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888