Cincinnati Taper Wheel Adapters.
4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER. FOR 1.250" ID WHEELS. USED ON ALL CINCINNATI NO. 1 AND NO. 2 SPINDLES, COVEL, AND GALLMEYER & LIVINGSTON CUTTER GRINDERS; OR ANY SPINDLES WITH .87" DIAMETER AT LARGE END OF TAPER AND 4.500" TPF

FIG.1

FIG.2


For newer style Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper.  Adapter locked on spindle taper with bolt.
SOPKO  
CATALOG NO.    
FIG SOPKO PART NO. DIMENSIONS
A B C D
00108** 1 C100-1KW 3/4 to 1 2-1/4 2 1-1/4-16LH
00253** 1 C100-2KW 3/4 to 1 2-1/4 2 1-1/4-16RH
00278* 1 C200-1KW 1/4 to 1/2 2-1/4 1-3/8 1-1/4-16LH
00239* 1 C200-2KW 1/4 to 1/2 2-1/4 1-3/8 1-1/4-16RH
00279* 1 CX200-2KW 1/4 to 1/2 2 1-3/8 1-1/4-16RH
00407** 1 C400-1AKW 2 2-1/4 3 1-1/4-16LH
00408** 1 C400-2AKW 2 2-1/4 3 1-1/4-16RH
00409** 1 C400-1BKW 1 to 2 2-1/4 3 1-1/4-16LH
00411** 1 C400-2BKW 1 to 2 2-1/4 3 1-1/4-16RH
00282* 2 C230-1KW 1/4 to 1/2 3 1-3/8 1-1/4-16LH
00283* 2 C230-2KW 1/4 to 1/2 3 1-3/8 1-1/4-16RH
00284* 2 C235-1KW 1/4 to 1/2 3-1/2 1-3/8 1-1/4-16LH
*Spindle mounting bolt 14362 and retaining ring 04269 included.
**Includes spindle mounting bolt 14362 but no retaining groove or ring.


For older style Cincinnati flat belt, center drive spindles.  No keyway in taper.  Adapter locked on spindle taper with spindle nut.*
 

 

FIG.1

FIG.2
SOPKO  
CATALOG NO.    
FIG SOPKO
PART NO.
DIMENSIONS
A B C D
00103 1 C100-1 3/4 to 1 2-1/4  2 1-1/4-16LH
00104 1 C100-2 3/4 to 1 2-1/4 2 1-1/4-16RH
00205 1 C200-1 1/4 to 1/2 2-1/4  1-3/8 1-1/4-16LH
00206 1 C200-2 1/4 to 1/2 2-1/4 1-3/8 1-1/4-16RH
00280 1 C200-2C 1/2 2-1/4 1-3/8 1-1/4-16RH
00281 1 CX200-2 1/4 to 1/2 2 1-3/8 1-1/4-16RH
00442 1 C400-1A 2 2-1/4 3 1-1/4-16LH
00443 1 C400-2A 2 2-1/4  3 1-1/4-16RH
00444 1 C400-1B 1 to 2 2-1/4 3 1-1/4-16LH
00445 1 C400-2B 1 to 2 2-1/4 3 1-1/4-16RH
00109 2 C130-2 3/4 to 1 3 2 1-1/4-16RH
00287 2 C230-1 1/4 to 1/2 3 1-3/8 1-1/4-16LH
00288 2 C230-2 1/4 to 1/2 3 1-3/8 1-1/4-16RH
*Spindle mounting nut not included.

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.

 

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

31

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Cincinnati Taper Wheel Adapters
With Glare Gear Assembly.
4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER. FOR 1.250" ID WHEELS. USED ON ALL CINCINNATI NO. 1 AND NO. 2 SPINDLES, COVEL, AND GALLMEYER & LIVINGSTON CUTTER GRINDERS; OR ANY SPINDLES WITH .87" DIAMETER AT LARGE END OF TAPER AND 4.500" TPF.


For newer style Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper. Adapter locked on spindle taper with bolt.

01116**

SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS

A B C D

01125    GGC100-2KW 3/4 to 1 2-1/4 2 1-1/4-16RH
00571     GGC200-1KW 1/4 to 1/2 2-1/4 1-3/8 1-1/4-16LH
01116     GGC200-2KW 1/4 to 1/2 2-1/4 1-3/8 1-1/4-16RH

*Spindle mounting bolt 14362 and retaining ring 04269 included.
**Grinding wheel not included.


For older style Cincinnati flat belt, center drive spindles. No keyway in taper.
Adapter locked on spindle taper with spindle nut.*

00909**

SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS

A B C D

00909    GGC200-1

1/4 to 1/2

2-1/4

1-3/8

1-1/4-16LH

* Spindle mounting nut not included.
**Grinding wheel not included.

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

32

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Cincinnati Taper Flanged and Cup
Wheel Extension Adapters.

4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER. FOR 1.250" ID WHEELS. USED ON ALL CINCINNATI NO. 1 AND NO. 2 SPINDLES, COVEL, AND GALLMEYER & LIVINGSTON CUTTER GRINDERS; OR ANY SPINDLES WITH .87" DIAMETER AT LARGE END OF TAPER AND 4.500" TPF.


Sopko flanged adapters are machined from forged alloy steel. The resulting one-piece hub design distributes mounting pressures away from the bore, the weakest part of the grinding wheel. The inherent rigidity of one-piece design and the precision ground flange provides identical radial load-bearing surfaces for positive wheel lock and better spindle driving torque to the abrasive wheel. All surfaces are ground concentric and square for optimum surface finishes. Completely heat treated, Sopko flanged adapters are safe to use and maintain their rigidity.

00457

SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS

A D E

00446

C4.5-1

0 to 1/2 1-1/4-16LH -
00564*

C4.5-1KW

0 to 1/2 1-1/4-16LH 1/8
00158

C4.5-2

0 to 1/2 1-1/4-16RH -
00457*

C4.5-2KW

0 to 1/2 1-1/4-16RH 1/8

*Spindle mounting bolt 14362 and retaining ring 04269 included.


Sopko cup wheel adapters are made with a THIN-WALL FRONT FLANGE design to give maximum usage of cup wheel depth. Fully HEAT TREATED, and made from SOLID BAR STOCK, Sopko cup wheel extension adapters are RIGID to provide positive lock. A hardened nut locks the wheel from the back of the adapter. Because of this nut configuration, RH threads are used for CW spindle rotation and LH threads are used for CCW rotation; providing a safe locking system that WILL NOT LOOSEN during spindle rotation.

00289

00290†


SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS

A D E

00289   

C200-2CW

3/8 to 5/8 1-1/4-16RH -
00290**

C200-2CWKW

3/8 to 5/8 1-1/4-16RH 1/8

** Includes spindle mounting bolt 14362 only.
†Grinding wheel not included.

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

33

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Cincinnati Taper Long Extended Wheel Adapters.
4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER. FOR 1.250" ID WHEELS. USED ON ALL CINCINNATI NO. 1 OR NO. 2 SPINDLES, COVEL, AND GALLMEYER & LIVINGSTON CUTTER GRINDERS; OR ANY SPINDLES WITH .87" DIAMETER AT LARGE END OF TAPER AND 4.500" TPF.


For newer style Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper. Cincinnati taper long extended adapters are designed to provide added clearance by locating the grinding wheel further from the spindle nose. These adapters are ideal for surface grinding applications where the operator must reach across a boss or other obstruction. The adapters also have application on cutter grinders and tool grinders.

00242 00243

SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS

A C D F

00240* CE200-1A 1/4 to 3/4 3 1-1/4-16LH 1-15/16
00242* CE200-2A 1/4 to 3/4 3 1-1/4-16RH 1-15/16

00241* CE201-1A 1/4 to 3/4 4-7/16 1-1/4-16LH 3-3/8
00243* CE201-2A 1/4 to 3/4 4-7/16 1-1/4-16RH 3-3/8

*Includes spindle mounting bolt 14362 only.


For older style Cincinnati flat belt, center drive spindles.

00291

SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS

A D

00291 CE202-1A 1/4 to 3/4 1-1/4-16LH
00292 CE202-2A 1/4 to 3/4 1-1/4-16RH

Standard taper (3.000" TPF) long extended wheel adapters on page 14.
 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

34

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 

Cincinnati Taper Reversible Wheel Adapters.
4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER.  DESIGNED FOR 1.250" ID DIAMOND, CBN, AND VITRIFIED WHEELS.


THERE IS A DIFFERENCE WITH SOPKO REVERSIBLE ADAPTERS!

  • Formed wheels are used either way, without redressing.

  • Can be REVERSED without DISMOUNTING the wheel for prolonged square corner life of diamond wheels.

  • Sopko reversible wheel adapters make it possible to use the same dressed angle for BOTH RIGHT AND LEFT GROUND TOOL BITS.

  • EASY TO USE-Just remove the adapter from the spindle nose and REMOUNT in the reverse direction.

  • SAFE TO USE-Sopko reversible wheel adapters are manufactured with a double-taper, and are securely locked against loosening by the wheel rotation. Manufactured from quality steel, then HARDENED AND GROUND to withstand the rigors of daily use.

CINCINNATI TAPER "OLD STYLE" REVERSIBLE WHEEL ADAPTER.
A precision ground double-taper makes wheel mounting in opposite directions safe and reliable. Grinding wheel edges wear during use, but obtaining a new sharp edge is as easy as reversing the adapter on the spindle. Designed for the older Cincinnati flat belt center drive spindles, the adapter comes complete with a 1/2-13LH 06074 and a 1/2-13RH 06073 slotted spindle nut.

SOPKO
CATALOG NO.
SOPKO PART NO. 

DIMENSIONS

A

D
00122   122RWA 1/4 to 1/2 1-1/4-16RH

CINCINNATI TAPER "NEW STYLE" REVERSIBLE WHEEL ADAPTER.
A precision ground double-taper makes wheel mounting in opposite directions safe and reliable. Grinding wheel edges wear during use, but obtaining a new sharp edge is as easy as reversing the adapter on the spindle. Designed for the newer Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper. The adapter comes complete with a 3/8-16RH mounting bolt 14362.

 

SOPKO
CATALOG NO.
SOPKO PART NO.  DIMENSIONS
A D
00123 122CRWA 1/4 to 1/2 1-1/4-16RH

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

35

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Cincinnati Taper Old Style Male Extensions.
4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER.
EXTEND THE REACH OF YOUR CINCINNATI ADAPTERS.

Made for older Cincinnati flat belt, center drive spindles, these extensions offer added reach when standard adapters won’t work. Increased utility is achieved because grinding wheels mounted on Cincinnati taper adapters need not be dismounted. Very useful when grinding with diamond wheels, the extensions come complete with a 1/2-13 hex spindle nut to safely secure adapters.
A 1-1/16" wrench flat on the body diameter makes installation and removal easy.

TIME-SAVING FEATURES:

  • PRECISION internal Cincinnati taper for RELIABLE spindle mounting.
  • PRECISION external Cincinnati taper for PROPER adapter mounting.
  • GROUND external threads for CONCENTRICITY and SQUARENESS.
  • HEAT TREATED for strength and rigidity.
67791
73281

SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS

C D F

13457

134517-LH

5-5/16

1/2-13LH

4

67791

67791-RH

5-5/16

1/2-13RH

4


00134   

134515-LH

3-3/8

1/2-13LH

2-1/16

73281   

73281-RH

3-3/8

1/2-13RH

2-1/16

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

36

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Cincinnati Taper New Style Male Extensions.
4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER.
EXTEND THE REACH OF YOUR CINCINNATI ADAPTERS.

Made for newer Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper, this extension offers added reach for operations where regular adapters won’t work. Increased utility is obtained because mounted grinding wheels need not be dismounted. Very useful when grinding with diamond wheels, the extension comes complete with a 3/8-16RH spindle bolt 15674 that runs through the body and locks the extension and wheel adapter onto the taper.
56173

SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS

OAL

56173 156173RH 4-13/16


Made for newer Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper, this extension offers the same quality features as the 56173 above but 2" shorter OAL. Furnished with 3/8-16RH spindle bolt 15671.

56172


SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS

OAL

56172 156172RH 2-13/16

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

37

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 

Cincinnati Taper Collet Chuck Extension Adapters.
4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER.  FOR A SMALL RADIUS OR THAT ONE SMALL SLOT.  SAVE BOTH THE EXPENSE AND THE SET-UP TIME OF A HIGH SPEED ATTACHMENT.

 


THERE IS A DIFFERENCE WITH SOPKO!

  • Made from superior QUALITY alloy steel and heat treated for optimum performance.

  • Tapers are PRECISION GROUND at both ends of the collet chuck extension adapter.

  • The extension body is GROUND for concentricity.

  • The hardened collet nut has a precision internal taper that seats PRECISELY against the collet nose-angle to insure PROPER ENGAGEMENT of the grinding wheel shank.

Ideal for older Cincinnati flat belt center drive grinder spindles. The set includes a 1/4" 6000 series collet 59108, collet nut 59125, and floating nut spacer 00662 (FN-1). A 1-1/4" wrench flat on the body makes installation and removal easy. The hex spindle nut must be selected separately to suit your machine.

SOPKO
CATALOG  NO.
SOPKO PART NO.
00757 C200-CCEA
 



6000 SERIES COLLETS*
RANGE 1/8" TO 1/2"

SOPKO
CATALOG NO.

COLLET CAPACITY
59100 1/8
59102 5/32
59104 3/16
59106 7/32
59108 1/4
59112 5/16
59116 3/8
59120 7/16
59124 1/2
59125 NUT
*Additional collet sizes are available on special order.

Ideal for newer style Cincinnati grinders having direct motorized and timing belt driven spindles with a 1/8" keyway in the taper. The set includes a 1/4" 6000 series collet 59108, collet nut 59125, floating bolt spacer 01244 (FN-2), and socket head cap screw 01025 (FN-B). The bolt is dropped into the extension and through the round floating bolt spacer. In this position the bolt acts as a draw thread to pull the collet chuck extension onto the spindle taper. A 1-1/4" wrench flat on the body makes installation and removal easy.

SOPKO
CATALOG  NO.
SOPKO PART NO.
00679 C200-CCEA-KW

Standard taper (3.000" TPF) collet chuck extension adapters on page 18.
*Additional collet sizes are available on special order.


ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

38

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Cincinnati Taper Old Style I.D. Wheel
Extension Adapters.

4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER.
FOR A SMALL RADIUS OR THAT ONE SMALL SLOT.
SAVE BOTH THE EXPENSE AND THE SET-UP TIME OF A HIGH SPEED ATTACHMENT.

CHECK THESE FEATURES!
  • GROUND diameters for CONCENTRICITY.
  • HEAT TREATED for STRENGTH and SAFETY.
  • PRECISION GROUND taper for RELIABLE spindle mating.
  • IN STOCK for immediate shipment.

13426*

Designed for added reach, the IDWE comes complete with a 1/2-13 hex spindle nut.
A 1/2-13 draw thread locks the extension onto the spindle.
A 1-1/16" wrench flat on the body makes installation and removal easy.

SOPKO
CATALOG NO.
SOPKO
PART NO.

DIMENSIONS


A C D

13458 134518-LH 3/8 to 1/2 4-1/2 1/2-13LH
13426 134269-RH 3/8 to 1/2 4-1/2 1/2-13RH

Standard taper (3.000" TPF) ID wheel extension adapters on page 16 and 17.
*Grinding wheel not included.

78515*

Identical to the long series above but 2" shorter OAL. Has a 1/2-13 hex spindle nut.
A 1/2-13 draw thread locks the extension onto the spindle.
A 1-1/16" wrench flat on the body makes installation and removal easy.

SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS

A C D

13456 134516-LH 3/8 to 1/2 2-1/2 1/2-13LH
78515 78515-RH 3/8 to 1/2 2-1/2 1/2-13RH

Standard taper (3.000" TPF) ID wheel extension adapters on page 16 and 17.
*Grinding wheel not included.
 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

39

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Cincinnati Taper New Style I.D. Wheel Extensions.
4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER. FOR .500" ID WHEELS.
FOR A SMALL RADIUS OR THAT ONE SMALL SLOT.
SAVE BOTH THE EXPENSE AND SET-UP TIME OF A HIGH SPEED ATTACHMENT.

Made for newer Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper. The 3/8-16RH thread on the arbor 04271 acts as a draw thread to pull the extension onto the taper and a 3/4" wrench flat makes installation and removal easy. The extension comes complete with two 1-1/2" mating side flanges 00053 (F4), a 1/2-13RH hex spindle nut 05002, and an extension body 04272.

55000

SOPKO
CATALOG NO.
SOPKO
PART NO.

55000 NS550

Standard taper (3.000 TPF) ID wheel extension adapters on page 16 and 17.


Made for newer Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper and furnished with two 2" mating side flanges 00054 (F1), a 1/2-13RH hex spindle nut 05002, and an extension body 04272. The 3/8-16RH thread on the arbor 04271 acts as a draw thread to pull the extension onto the taper, and a 3/4” wrench flat makes installation and removal easy.

00483


SOPKO
CATALOG NO.

00483

Standard taper (3.000 TPF) ID wheel extension adapters on page 16 and 17.

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

40

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Cincinnati Taper New Style and Old Style Conversion Adapters.*
ID IS 4.500" TPF WITH .87" DIAMETER AT LARGE END OF TAPER.
OD IS 3.000" TPF WITH 1.00" DIAMETER AT LARGE END OF TAPER.
MOUNT STANDARD TAPER ADAPTERS ON CINCINNATI TAPER SPINDLES.


Designed for newer Cincinnati direct motorized and timing belt driven spindles having a 1/8" key in the taper, this conversion adapter allows you to mount any Standard Taper (3.000" TPF) adapter to your Cincinnati Taper spindles. Furnished with special spindle mounting bolt 04249.
A 1-1/4” wrench flat on the body makes installation and removal easy.

50081

SOPKO
CATALOG NO.

50081

 

Designed for older Cincinnati flat belt center driven spindles, this conversion adapter features a Cincinnati Taper (4.500" TPF) in the ID and a Standard Taper (3.000" TPF) on the OD.
Now you can confidently mount standard taper adapters on your Cincinnati taper spindles. Furnished with a 1/2-13 hex spindle nut. A 1-1/16” wrench flat on the body makes installation and removal easy.

00114

SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS

D

00113 S113 1/2-13LH
00114 S114 1/2-13RH

*For additional double taper conversion quills see page 85, 86, 87, 88 and 89.

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

41

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888