Sopko Mounting Brackets for any
3” Diameter Cartridge Spindles.

DESIGNED FOR HEALD MACHINE MODELS 70, 70A, 72, 72A, 75, 75A, AND 271, 272,
273A, 274, 275, 276, 280, 280A, 281, 290, 290A, 291, 170A, 180A, AND 190A.
Fits Okamoto IGM-2M and IGM-15CNC.

Sopko Mounting Brackets are made of aged cast iron to provide an anchor-like support for any 3" diameter cartridge spindle. Rigid by design, Sopko brackets feature a large surface area base plate for solid member contact. The accurately machined dovetail base provides positive alignment, easy positioning, and secure clamping for operator safety. A two bolt quick mount/dismount system keeps any spindle parallel to the mounting base during operation. The mounting bore is precisely finished for uniform clamping contact across the full diameter of the spindle for vibration-free operation.
 
01246 (HC30) MOUNTING BRACKET

Fits Heald machine models 70, 70A, 72, 72A, and 75A requiring a 3" center line distance from the base. Unit weight 14.15 lbs.

01178 (HC35) MOUNTING BRACKET

Fits Heald machine models 271, 272, 273A, 274, 275, 276, 280, 280A, 281, 290, 291, 170A, 180A, 280A, 281, 290, 291, 170A, 180A, and 190A requiring a 3-1/2" center line distance from the base. Unit weight 13 lbs. Fits Okamoto IGM-2M and IGM-15CNC machine models.


01246


01178

 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

107

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888

 


Optional Accessories for
Sopko High Speed Attachment.

The Sopko High Speed Attachment provides higher speeds than would ordinarily be obtained with other spindles. Capable of being mounted in any position about its axis, the unit attaches quickly and easily to the spindle housing and is held securely by two clamping screws. The drive pulley assembly is mounted and balanced on a wheel adapter 00200. Made from quality alloy steel, heat treated for strength, and precisely ground to maximize surface contact, the variety of eccentric bushings increases the unit’s versatility. And Sopko quality does not stop with the High Speed Attachment, it extends right into the most varied selection of grinding quills available anywhere.
29707 29709
Jarno taper quill extensions available.*
Ask for brochure No. 49948.
08010
 
Optional accessories:*
29707 625 Jarno LH collet chuck quill furnished with 4000 series nut, 1/8”, and 1/4” collets.
29709 625 Jarno LH collet chuck quill furnished with 5000 series collet nut only.
08010 3-1/8" Eccentric bushing for Boyar-Schultz No. 6 x 12.
08009 3-1/4" Eccentric bushing for Brown & Sharpe No. 2.
08011 80MM Eccentric bushing.

Maintain safe speeds, refer to grinding wheel manufacturers’ instructions and ANSI B7.1 or DIN 69170 safety standards.
See page 97 for series 4000 and 5000 collets (specify size).
*Grinding wheel not included.
 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

109

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888