FLOATING NUT SPACERS, BOLTS, RINGS, STUDS, AND SET SCREWS.
2-7/8" OAL, 5/16" hex socket. Black oxide finish.
3/16” hex socket on both ends.
| Tools and
Accessories for Wheel Adapters. FLOATING NUT SPACERS, BOLTS, RINGS, STUDS, AND SET SCREWS. |
|
| 00662 (FN-1) Floating nut spacer. 11/16" ID hex. Black oxide finish. For standard taper collet chuck extension adapters, long and short IDWEs, male extensions, and older style Cincinnati collet chuck extensions. | |
| 00663 (ENFN-1) Same as 00662 above but Electroless Nickel finish. | |
| 01244 (FN-2) Floating bolt spacer for new style Cincinnati collet chuck extension adapter 00679 (C200-CCEA-KW). 3/8" bore. Black oxide finish. | |
| 01025 (FN-B) 3/8-16RH bolt for new style Cincinnati collet chuck extension adapter 00679 (C200-CCEA-KW). 1-1/4" long, 5/16" hex socket. Black oxide finish. | |
| 14362 (143627) 3/8-16RH spindle mounting bolt for new style Cincinnati adapters with 1/8" keyway in taper. 1-1/4" long, 5/16" hex, flanged head. Black oxide finish. | |
| 15671 (156171) 3/8-16RH flanged spindle mounting bolt for short new style Cincinnati extension 56172 (156172RH) with 1/8" keyway in taper. 3-1/4" OAL, 5/16" hex. Black oxide finish. | |
| 15674 (156174) 3/8-16RH flanged spindle mounting bolt for long new style Cincinnati extension 56173 (156173RH) with 1/8" keyway in taper. 5-1/4" OAL, 5/16" hex. Black oxide finish. | |
| 04249
3/8-16RH flanged spindle mounting bolt for conversion style Cincinnati
adapter 50081, 2-7/8" OAL, 5/16" hex socket. Black oxide finish. |
|
| 01829 This
Cincinnati conversion stud allows use of “old style” adapters on new
style spindles. 1/2-13RH thread, .69” long steps to 3/8-16RH thread,
.81” long. 1-1/2” OAL. 3/16” hex socket on both ends. |
|
| 04269 Series 4000 retaining ring for new style Cincinnati adapters. | |
| 04278 #29 music wire lock ring to hold spindle nuts in Pope style adapters. | |
| 00825 Cup-Point 3/8-24 alloy socket set screws for Pope balancing weights. | |
| 00939 #10-32 nylon-tipped socket set screw for BR1 balancing rings, 00186 and 00187 nuts. | |
ROTATION: RH: Right-hand threads for CCW spindle rotation. LH: Left-hand threads for CW spindle rotation. |
 |
CAUTION! Always Wear Safety Goggles When Griding. |
|
84 |
William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888 |
||