Wheel Adapter Parts.
Keyed Washers.

Make it safe, make it perform, and make it reliable-that’s what drives Sopko product design. Even the simple adapter washer is not too trivial to be overlooked in our attention to detail. Single-tang washer designs set up inherent out-of-balance conditions that are avoided with Sopko products manufactured with equal and opposite adapter hub key slots and DUAL-TANG washers. The separation provided by a washer prevents potential frictional wheel damage caused by nut contact, assuring every machine operator of safe wheel lock that is less likely to loosen under a load than ordinary adapters. There’s a trust between Sopko and its customers; we’re working hard every day to keep it!
 

00034

00012

05518

00000

00062 00008

00032


SOPKO
CATALOG NO.
SOPKO
PART NO.
DIMENSIONS DESCRIPTIONS

A B C

00000 062x1-3/4 1-3/4 1/16 1-1/4 For X200-1 & X200-2 adapters

00003 913-0-00-1007 1.85 1/16 1-1/4 For ANCA MG7 series adapters

00004 062x2 2 1/16 1-1/4 For Pope adapters 00529,00530,00531,00532,00533

00030 030x2-1/4 2-1/4 1/32 1-1/4
00005 * EN-030x2-1/4 2-1/4 1/32 1-1/4 Electroless nickel plated
00006 SS030x2-1/4 2-1/4 1/32 1-1/4 Stainless steel
00062 062x2-1/4 2-1/4 1/16 1-1/4
00007 - 2-1/4 1/16 1-1/4 For 222RWA adapter only
00008 * EN-062x2-1/4 2-1/4 1/16 1-1/4 Electroless nickel plated
00009 SS062x2-1/4 2-1/4 1/16 1-1/4 Stainless steel

00447 - 2-5/16 1/32 1-1/4

01250 - 2-3/8 1/32 1-1/4

00031 030x2-7/16 2-7/16 1/32 1-1/4
00032 062x2-7/16 2-7/16 1/16 1-1/4

00010 030x3 3 1/32 1-1/4
00033 062x3 3 1/16 1-1/4
00011 * EN-062x3 3 1/16 1-1/4 Electroless nickel plated
00012 96.5301.5005 3 1/16 2 For ANCA TG7 series adapters

00016 030x3-1/2 3-1/2 1/32 1-1/4
00034 062x3-1/2 3-1/2 1/16 1-1/4

00035 - 4-1/8 1/16 2 For IMM adapter 00691
00019 25-1569-3 4-1/8 1/16 3 For shrouded adapter 00691 AND 00692

04250 - 4-1/4 1/16 1-1/4 For larger wheel adapters 00696, 00555
00023 - 4-1/4 1/16 2
05518 - 4-1/4 1/8 3 For larger wheel adapters 01316, 01317

04293 - 4-3/4 1/8 3 For Norton S-3 balancing adapters 00824

05519 - 5 1/8 3 For larger wheel adapters 01324, 01330, 01337, 01338

05307 - 7 1/8 5 For larger wheel adapters 01335, 01336

* In stock, but Electroless nickel plating is available for all washers at additional cost.
 

ROTATION:

RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.
CAUTION!
Always Wear Safety Goggles When Griding.

78

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888