Taper Adapters for Cincinnati Monoset Grinders.
30° INC ANGLE WITH .75" DIAMETER AT LARGE END OF TAPER.
FOR .750" AND 1.250" ID WHEELS.
00111 00110
SOPKO
CATALOG NO.		 SOPKO
PART NO.		 DIMENSIONS
A B H
00110 S110 1/4 to 1/2 1-3/8 3/4
00111 S111 1/4 to 1/2 2 1-1/4
50122 - 3/4 2 1-1/4
00099 00098

Sopko LONG EXTENDED MONOSET cutter and tool grinder adapters provide added clearance by locating the grinding wheel further from the spindle nose. They are ideal for applications requiring an operator to reach across an obstruction.
SOPKO
CATALOG NO.		 SOPKO
PART NO.		 DIMENSIONS
A B H
00099 SE110 1/4 to 1/2 1-3/8 3/4
00098 SE111 1/4 to 1/2 2 1-1/4

THERE IS A DIFFERENCE WITH SOPKO!

  • Monoset Collet Chuck Quills are GROUND all over for CONCENTRICITY.

  • PRECISION TAPERS are GROUND at both ends.

  • Made from superior QUALITY alloy steel and HEAT TREATED for optimum performance.

  • The hardened collet nut has a PRECISION INTERNAL TAPER that seats PRECISELY against the collet nose angle to ensure PROPER ENGAGEMENT of the grinding wheel shank.

  • Comes complete with 1/8" 20004 and 1/4" 20012 series 4000 collets, and collet nut 20013.*

*See page 97 for additional Series 4000 collet sizes.

 00097
 

ROTATION:
RH: Right-hand threads for CCW spindle rotation.
LH: Left-hand threads for CW spindle rotation.		 CAUTION!
Always Wear Safety Goggles When Griding.

42

William Sopko & Sons Co., Inc. ● 26500 Lakeland Blvd. ● Cleveland, Ohio 44132-2692 ● Order Desk (216) 289-1400 ● Fax (216) 289-1888